CONDTROL NEO X2-360
Vendor code: 1-2-128
Warranty: 24 months
- Vendor code
- 24 months
Cross line laser NEO X2-360 has two 360° planes – horizontal and vertical. NEO X2-360 is indispensable for tile laying, floor coating, ceiling and partitions installation, leveling of walls and floors.
NEO X2-360 makes marking easier and more convenient. Just set up the instrument at required height, the horizontal plane will be clearly visible all the way around the room.
NEO X2-360 are made of shockproof plastic and covered by protective rubber bumper helping to decrease damage risks and maintain precision.
Neo X2-360 has a tilt mode. Just activate this mode and set up the instrument at required angle. Workers dealing with cabinet furniture, roofing systems, stairways as well as room decorators will appreciate this function.
Indoors and outdoors
NEO X Series cross line lasers are equipped with increased power lasers and have a pulse mode, which makes them applicable both indoors and outdoors even in bright sunshine. Original CONDTROL laser receiver allows to increase the working range up to 100 m.
A variety of mounting options
- Original mounting clip for fixing on a ceiling or drywall profile;
- Special hole on the housing for fixing on vertical constructions by a cable tie;
- A hole on the housing for mounting on a screw or original CONDTROL Clamp;
- A 5/8’’ thread for mounting on telescopic pole or tripod.
- Magnetic holder and adapter 5/8’’- 1/4’’ are included in the set.
Standard package: laser level, magnetic holder, adapter 5/8’’ – 1/4’’, cable tie, pouch, batteries 3 pcs (AA), user manual.
- Working Range/with receiver 30 m / 60 m
- Leveling accuracy ±0,3 mm/m
- Self-leveling range ± 4,5°
- IP protection rate IP54
- Thread for mounting on a tripod 5/8’’ and 1/4’’
- Laser Class II 635 nm < 1 mW
- Battery 3 х 1.5V LR6 alkaline (AA)
- Battery life 5 hours
- Operating temperature 0°C ... +50°C
- Storage temperature -20°C ... +70°C
- Dimensions 130х73х125mm
- Weight 0,45 kg