CONDTROL NEO X200 SET - laser level
Vendor code: 1-2-123
Warranty: 24 months
- Vendor code
- 24 months
CONDTROL NEO X200 Set
Laser level NEO X200 has ergonomic and multifunctional housing and projects 1 vertical and 1 horizontal line.
Bright lines and operation with receiver
Laser level X200 differs from similar products by brighter lines and wider fan angle. Using CONDTROL original multi-frequency receiver it allows to work outdoors even in bright sunlight.
The housing of NEO X200 is developed for operation in severe building area conditions. It is well protected from dust, dirt, splashes and covered by shockproof silicone bumper. In grip area housing is made of skid resistant ribbed surface.
To extend the life of battery separate switch-on of horizontal and vertical planes is provided. Choose necessary mode and work longer.
The family of laser levels Neo X200 has manual tilt mode. Just enable this function and incline laser level at required angle.
Variety of mounting options
- Original clamp allows fixing Neo X200 on ceiling or drywall profile.
- Special hole in the housing helps to fix laser level on vertical constructions by a cable tie.
- A hole on the housing for mounting on a screw or CONDTROL original accessories: Clamp, Krab, Wall Mount.
- Thread for mounting on telescopic pillar or tripod 5/8".
5/8 ’’ to 1/4 ’’ thread adapter
Thanks to the Neo X200 adapter, it can be mounted on both a tripod and CONDTROL Krab and Wall Mount accessories.
Standard package: Laser level, tripod 5/8’’, adapter 5/8’’ – 1/4’’, cable tie, batteries, user manual, hard case.
- Working Range/with receiver 30 m / 60 m
- Leveling accuracy ±0,3 mm/m
- Self-leveling range ± 4,5°
- IP protection rate IP54
- Thread for mounting on a tripod 5/8’’, 1/4’’
- Laser Class II 635 nm < 1 mW
- Battery 3 х 1.5V LR6 alkaline (AA)
- Battery life 15 hours
- Operating temperature 0°C ... +50°C
- Storage temperature -20°C ... +70°C
- Dimensions 120х75х105 mm
- Weight 500 g