CONDTROL TruSlope - laser level
Cross Line Laser TruSlope CONDTROL
The TruSlope CONDTROL cross line laser is designed for projecting inclined planes with a defined slope angle. The device is equipped with an OLED display and a pendulum tilt sensor that allows the projection of a horizontal inclined line based on the entered parameters.The included tilt adapter allows for precise angle adjustment, which is displayed in real time on the color OLED display. The display supports the selection of the tilt unit – degrees, percent, or millimeters per meter – for maximum operating convenience and to minimize errors. It also shows the current operating mode and battery level.
Areas of Application
The TruSlope CONDTROL is a modern cross line laser designed for construction, installation, and landscaping work.Ideally suited for:
• Creating road surfaces, sidewalks, and parking areas with controlled slope.
• Marking slopes in roofing and stair installation.
• Planning drainage systems to protect against soil erosion.
• Laying sloped floors in bathrooms and shower rooms.
• Aligning slopes for sewer pipes and roof gutters.
• Constructing inclined ramps for industrial and logistics facilities.
• Laying tiles and installing balconies, loggias, and terraces with a planned slope.
Functional Features
• Three green 360° laser lines (one horizontal and two vertical).• Vertical lines create zenith and nadir points for accurate floor-to-ceiling transfers.
• Independent switching of laser sources to save battery.
• Integrated mounts: two thread types (1/4’’ and 5/8’’) and an eyelet for attachment with screw or nail.
Durability and Reliability
• Internal metal frame for increased protection against shocks and falls.• Metal laser heads – for permanent optical protection
• Non-slip, shock-absorbing housing with rubber inserts.
• Dust- and splash-proof 3D silicone buttons.
• IP65 for use in all weather conditions on construction sites.
Autonomy and Convenience
• Two 5000 mAh lithium-ion batteries for 8–20 hours of continuous operation.• OLED display with battery level indicator for uninterrupted work.
Scope of Delivery
• Cross line laser• 2 batteries
• Tilt adapter
• Wall mount
• Charger
• User manual
• Durable plastic case
Specifications:
- Working Range/with receiver 40 m/80 m
- Leveling accuracy ±0,2 mm/m
- IP protection rate IP65
- Thread for mounting on a tripod 1/4", 5/8"
- Laser Class II 515 nm < 1 mW
- Operating temperature -10°C ... +50°C
- Storage temperature -20°C ... +70°C
- Dimensions 138x134x98 mm
- Weight 950 g