CONDTROL Xliner Combo 360G
- Vendor code
- 36 Month
CONDTROL Xliner Combo 360 G represents a new generation of laser levels with 360o horizontal line. Projection of vertical and horizontal lines, crossline and inclined planes helps to solve wide range of tasks: building of partition walls, wallpapering, tile laying, etc. Xliner Combo 360 G has got a laser plummet function. Brightness of the green laser is 4 times higher than red one, which increases the efficiency of the laser level in bright sunlight.
Remote control by the AppThe Xliner Combo 360 G is equipped with the Bluetooth module. Install the Xliner Remote free app on your smartphone or tablet and switch the planes, control the intensity of laser emission and operate the tool remotely. It is available to download on App Store and Google Play.
Green laserXliner 360G is equipped with a 520 nm green laser, which is 4 times brighter than red one at the same power of emitter. This feature makes the laser level equally effective at both indoor and outdoor constructions sites.
Pulse modeFor outdoor operation Xliner 360G has a pulse mode, which allows to work at distance up to 100 m using the laser receiver by CONDTROL.
High Protection rateShock-resistant rubberized case, high protection against moisture, dust and dirt make it possible to use Xliner 360G both indoors and at outdoor building sites at any time of the year.
Two types of threadThanks to two types of thread (1/4’’ and 5/8’’), Xliner 360G can be installed on all types of tripods, as well as on accessories designed for fixing laser levels.
Tilt modeWhen the tilt mode is activated, self-leveling is not available, which allows to project the line at any angle specified by the user. This feature is indispensable when marking and installing staircases, corner elements of construction or decor. If you direct the emitter of the laser level down, you can project the supporting axis for laying of floor coverings, including tiles.
Laser plummetCONDTROL Xliner Combo 360 G projects laser dots that allows to transfer markings from floor to ceiling.
Variety of mounting optionsCONDTROL Xliner Combo 360 G is equipped with two types of thread that allow to mount the laser level on all types of tripods and accessories:
- 5/8 ” thread for mounting on a spacer rod or tripod;
- 1/4’’ tread for mounting on a tripod or the CONDTROL accessories Krab and Wall Mount;
In addition, the laser level has a special hole for fixing it on the vertical structures with nails or screws.
Wide range of possibilities of the CONDTROL Xliner Combo 360 G will meet the request of the most demanding professional and will allow to spend less time when solving different tasks.
Standard package: laser level, wall mount, clamp, magnetic target, batteries (AA), user manual, plastic case.
- Working Range/with receiver 50 m/100 m
- Leveling accuracy ±0,2 mm/m
- Self-leveling range ± 3,5°
- IP protection rate IP54
- Thread for mounting on a tripod 1/4’’ , 5/8’’
- Laser Class II 520 nm < 1 mW
- Battery 4 х 1.5V LR6 Alkaline batteries (AA)
- Operating temperature -10°C ... +50°C
- Storage temperature -20°C ... +70°C
- Dimensions 132x85x116 mm
- Weight 0,44 kg