CONDTROL Xliner Quattro 360G Kit
Vendor code: 7-2-106
Warranty: 36 Month
- Vendor code
- 36 Month
CONDTROL Xliner Quattro 360G Kit
It is a professional extended kit that includes a laser level XLiner Quattro 360G, a wall mount Wall Mount Pro, a clamp, a magnetic target, Li-ion batteries, user manual and a reliable waterproof plastic case.
CONDTROL Xliner Quattro 360G is another outstanding new model in the XLiner series. Developed in Russia, it combines innovative technical solutions and best traditions of predecessor models. This convenient, multifunctional and reliable tool will significantly reduce the time of work on marking of rooms.
5 reasons to purchase the Xliner Quattro 360G laser levelToday, the tool market offers a wide range of laser levels, but it is difficult to choose a reliable, accurate and truly high-quality instrument from this variety. If you are not ready to spend money on an expensive tool with low-grade technical specifications, take a look at Xliner Quattro 360G.
1. Laser level Xliner Quattro 360G projects two 360o planes (horizontal and vertical) and a laser dot (nadir).
2. The built in Bluetooth module for remote control of the laser level using the free Xliner Remote APP on a smartphone or tablet.
3. High level of IP protection.
4. An additional rechargeable battery ensures non-stop operation of the laser level for 8 hours.
5. Due to the structure of the human eye the green color of the laser beam seems much brighter than red, which makes marking more comfortable and extends the working range.
Remote control by the App
One of the strongest advantages of Xliner Quattro 360G is a Bluetooth module for remote control of the laser level. No need to stop working to switch on required laser planes and adjust brightness of the laser. All these actions can be done via free Xliner Remote App installed on your smartphone or tablet. It is convenient to operate Xliner Quattro 360G remotely whether without a workmate or being far from the laser level.
Green laserLaser level Xliner Quattro 360G projects green lines, which is the most comfortable color for a human eye. With regard to the light output, having the same power, the red laser is significantly below the green one in equal lighting conditions. Bright monochromatic lines projected by Xliner Quattro 360G make marking more convenient and accurate, at the same time increasing the working range.
Reliability and durabilityXliner Quattro 360G features high level of protection against shock, dust and water. Thanks to the anti-slip pad, the device holds strongly in your hand. The covers on the laser modules are made of metal and also protected by rubber pads. Unlike plastic, they will not break at impact or from falling. The control panel is made of silicone. Such panel is stronger and more durable than membrane. It won’t either crack in freezing temperatures or wear off in the course of time, or come off due to moisture and dampness. With the Xliner Quattro 360G, you can work even outdoors and in bad weather conditions keeping the gloves on. Buttons are pressed easily, without much effort.
3 mounting optionsXliner Quattro 360G has 2 types of tripod thread: 1/4’’and 5/8’’ which allows to install the instrument on all types of accessories and tripods applicable for laser levels. A hole for mounting on screw or nail provide more opportunities for operation of the Quattro 360G. The laser level can be fixed on the wall, timber and other surfaces where you can drive a nail in or a self-tapping screw.
Two lithium-ion batteries (Li-ion)Other laser levels of Xliner series are powered by common batteries. Quattro 360G is equipped with 2 high capacity rechargeable batteries (2600mAh). Unlike common batteries, modern lithium-ion batteries can work at constant and high loads maintaining capacity for a long time (more than 8 hours for each battery).
Multifunctional toolThe scheme of laser planes is optimized for almost all types of construction, repair and design works. A laser level of the new generation is indispensable for building of frame houses. A special element on the laser module projects a laser dot, which makes it possible to transfer marked points on the floor to the ceiling (this function is useful especially for installation of lighting), as well as check if the doorways and window units are accurately installed. Operating XLiner Quattro 360 you may work all over the perimeter of the room without changing the position of the laser level.
Inclined planes and self-levelingThe laser level can align automatically at minor fluctuation and vibration. If the laser is out of the self-leveling range, it will signal a displacement. Lock the compensator to switch off this function and activate projection of inclined planes. Use it to for installation of staircase, slope of the roof, corner elements and decor. Turn the laser level upside down to make marks for tile laying, installation of laminate floor and other floor coverings.
Working range up to 100m!Maximal working range of most laser levels is 20m and 60m with laser receiver. The experts of CONDTROL research and development center managed to increase the working range to 60 m. Improved laser level can be used for marking at 60m, 100 m with the laser receiver.
Application of Xliner Quattro 360G:• Leveling of floors and walls.
• Installation of windows and doors.
• Filling coverings, installation of adjustable floors.
• Installation of built-in furniture, household appliances.
• Laying tiles.
• Various construction, repair and design works.
Standard package: laser level, Li-ion battery 2 pcs, charging cable, magnetic target, wall mount, clamp, user manual and plastic case.
- Working Range/with receiver 60/100 m
- Leveling accuracy ±0,2 mm/m
- Self-leveling range ± 3,5°
- IP protection rate IP54
- Thread for mounting on a tripod 1/4’’ and 5/8’’
- Laser Klass II 515 nm < 1 mW
- Battery 7.4V 2600 mAh Li-ion
- Operating temperature -10°C ... +50°C
- Storage temperature -20°C ... +70°C
- Dimensions 320x320x150 mm
- Weight 2.75kg