CONDTROL Xliner Quattro 360G
Vendor code: 7-2-105
Warranty: 36 Month
- Vendor code
- 36 Month
5 reasons to purchase the Xliner Quattro 360G laser level
Today, the tool market offers a wide range of laser levels, but it is difficult to choose a reliable, accurate and truly high-quality instrument from this variety. If you are not ready to spend money on an expensive tool with low-grade technical specifications, take a look at Xliner Quattro 360G.
1. Laser level Xliner Quattro 360G projects two 360o planes (horizontal and vertical) and a laser dot (nadir).
2. The built in Bluetooth module for remote control of the laser level using the free Xliner Remote APP on a smartphone or tablet.
3. High level of IP protection.
4. An additional rechargeable battery ensures non-stop operation of the laser level for 8 hours.
5. Due to the structure of the human eye the green color of the laser beam seems much brighter than red, which makes marking more comfortable and extends the working range.
Remote control by the App
One of the strongest advantages of Xliner Quattro 360G is a Bluetooth module for remote control of the laser level. No need to stop working to switch on required laser planes and adjust brightness of the laser. All these actions can be done via free Xliner Remote App installed on your smartphone or tablet. It is convenient to operate Xliner Quattro 360G remotely whether without a workmate or being far from the laser level.
Лазерный нивелир Xliner Quattro 360G проецирует лучи зеленого цвета — самого комфортного для человеческого глаза. В равных условиях освещенности при одинаковой мощности излучателей красный лазер значительно уступает зеленому в светоотдаче. Проецируемые Xliner Quattro 360G яркие монохроматические лучи делают работу с разметкой более удобной и точной, увеличивают дальность работы.
Reliability and durability
Xliner Quattro 360G features high level of protection against shock, dust and water. Thanks to the anti-slip pad, the device holds strongly in your hand. The covers on the laser modules are made of metal and also protected by rubber pads. Unlike plastic, they will not break at impact or from falling. The control panel is made of silicone. Such panel is stronger and more durable than membrane. It won’t either crack in freezing temperatures or wear off in the course of time, or come off due to moisture and dampness. With the Xliner Quattro 360G, you can work even outdoors and in bad weather conditions keeping the gloves on. Buttons are pressed easily, without much effort.
3 mounting options
Xliner Quattro 360G has 2 types of tripod thread: 1/4’’and 5/8’’ which allows to install the instrument on all types of accessories and tripods applicable for laser levels. A hole for mounting on screw or nail provide more opportunities for operation of the Quattro 360G. The laser level can be fixed on the wall, timber and other surfaces where you can drive a nail in or a self-tapping screw.
Two lithium-ion batteries (Li-ion)
Other laser levels of Xliner series are powered by common batteries. Quattro 360G is equipped with 2 high capacity rechargeable batteries (2600mAh). Unlike common batteries, modern lithium-ion batteries can work at constant and high loads maintaining capacity for a long time (more than 8 hours for each battery).
The scheme of laser planes is optimized for almost all types of construction, repair and design works. A laser level of the new generation is indispensable for building of frame houses. A special element on the laser module projects a laser dot, which makes it possible to transfer marked points on the floor to the ceiling (this function is useful especially for installation of lighting), as well as check if the doorways and window units are accurately installed. Operating XLiner Quattro 360 you may work all over the perimeter of the room without changing the position of the laser level.
Inclined planes and self-leveling
The laser level can align automatically at minor fluctuation and vibration. If the laser is out of the self-leveling range, it will signal a displacement. Lock the compensator to switch off this function and activate projection of inclined planes. Use it to for installation of staircase, slope of the roof, corner elements and decor. Turn the laser level upside down to make marks for tile laying, installation of laminate floor and other floor coverings.
Working range up to 100m!
Maximal working range of most laser levels is 20m and 60m with laser receiver. The experts of CONDTROL research and development center managed to increase the working range to 60 m. Improved laser level can be used for marking at 60m, 100 m with the laser receiver.
Application of Xliner Quattro 360G
• Leveling of floors and walls.
• Installation of windows and doors.
• Filling coverings, installation of adjustable floors.
• Installation of built-in furniture, household appliances.
• Laying tiles.
• Various construction, repair and design works.
- Working Range/with receiver 60/100 m
- Leveling accuracy ±0,2 mm/m
- Self-leveling range ± 3,5°
- IP protection rate IP54
- Thread for mounting on a tripod 1/4’’ , 5/8’’
- Laser Class II 515 nm < 1 mW
- Battery 7.4V 2600 mAh Li-ion
- Operating temperature -10°C ... +50°C
- Storage temperature -20°C ... +70°C
- Dimensions 155x85x132 mm
- Weight 0,73 kg